IMRON® FLEET LINE ELITE and HDC
Imron® Fleet Line is our advanced coating solution for commercial vehicles, trucks, buses and trailers. A comprehensive range of products developed specifically for the commercial vehicle sector.
Based on the PowerTint mixing machine with concentrated tints and a varied set of binders, Imron® Fleet Line is suitable for both VOC-regulated and non-VOC-regulated markets – delivering excellent results and productivity.
Imron® Elite has the following binders:
Imron® Fleet Line systems provide a full colour offering including RAL and European fleet shades. A comprehensive undercoat package enables you to apply Imron Fleet Line to a variety of substrates. A choice of thinners and activators allows you to tailor the performance to your specific needs.
PercoTop® CS970 – 2K HS Polyurethane 9700
PercoTop® 9700, is a 2 Pack, high solids topcoat which achieves the highest standards in gloss and durability. Full film build can be achieved in one or 1.5 passes thanks to its optimised flow, increasing workshop productivity and increasing paintshop throughput. There are a wide variety of activators and thinners suited to various equipment and climatic conditions ensuring optimum results every time.
PercoTop® 9700 can be used in a wide variety of applications. Its highly durable finish offers excellent mechanical resistance which makes it a natural choice for many commercial applications. PercoTop® 9700 can also deliver a wide range of gloss levels, from matt to high gloss and offers a wide colour range.
PercoTop® boosts paintshops productivity and offers good flow, reduced application time, very short drying times and lower material consumption.
PercoTop® 9675 2 Pack Polyurethane
PercoTop® 9675 is a low VOC, 2 pack solvent borne polyurethane topcoat developed for commercial vehicle refinishing.
PercoTop® 9675 gives a high-quality finish after 1 or 1.5 coats, depending on the colour and substrate. It offers excellent sagging performance and flow, especially on complex shapes with overlapping spray zones.
A broad selection of activators and thinners make PercoTop® 9675 adaptable to a wide range of equipment and climatic conditions to achieve optimum results. PercoTop® 9675 has been specially designed to suit airless, air-mix or electrostatic application equipment without the risk of air-entrapment and foaming. It is also well suited for conventional, HVLP and high-pressure spray equipment.
Reduced application time, good coverage and very short drying times are key advantages of PercoTop® 9675, which will boost the productivity of any paint shop. Consistent application, an excellent finish, increased efficiency, a low solvent content, as well as outstanding colour accuracy – PercoTop® 9675 guarantees excellent results, every time.
Percotop® CS911 – 2K DTM (Direct to Metal Topcoat)
PercoTop® 611 is a direct to metal 2 Pack polyurethane topcoat designed for a wide variety of industries including commercial vehicle chassis and tipper bodies.
PercoTop® 911 is designed to be applied direct to metal without the need for a primer. A fast and cost effective alternative to conventional two stage applications. PercoTop® 911 is backed by broad selection of activators, reducers and additives, allowing flexibility in application and drying .
Key attributes are excellent adhesion and corrosion protection on all types of metal substrates e.g. steel, aluminium and galvanised steel. The high mechanical resistance makes this topcoat the ideal choice for cost effective refurbishment jobs.
PercoTop® 911 boosts productivity: the use of an adhesion primer is not required, which results in significant labour and process cost savings.
Imron® HydroTopCoat ®7200
HydroTopCoat ®7200 is a flexible, eco-friendly waterborne paint system which has been specially developed for use in the transportation industry.
This versatile two pack polyurethane topcoat meets the demanding finishing requirements of a range of sectors including bus manufacturers, fleet operators and specialist PSV refurbishment operations.
HydroTopCoat ®7200 has outstanding anti-graffiti properties and is highly resistant to removal agents which means any graffiti can be cleaned quickly and easily.
HydroTopCoat® is lead-free and does not contain heavy metals. The VOC is the lowest possible, exceeding current and future EU legislation for coatings in the manufacturing sector.
HydroTopCoat® 7200 is perfect for a wide range of applications and can be applied to all types of metal and plastic substrates. It can also be applied using all usual coating processes airless, air-mix and conventional, HVLP.
HydroTopCoat® offers the same benefits as high solids solvent based products but without the environmental impact. It also dries fast and the 1.5 to 2 coat application yields high productivity and very low paint consumption. With excellent rheology control, HydroTopCoat can handle the most complex shapes.
HydroTopCoat® is available in a wide range of fleet operator shades. In addition to high gloss, it is also available in a range of low sheen finishes from matt to eggshell it possible to make almost any solid colour with any gloss level.
The superior quality of Hydrotopcoat is based on the latest pigment selection and state-of-the art dispersion technology. HydroTopCoat is a robust, long-lasting topcoat able to withstand the rigours of the road.
Cromax® VR-1120 VALUECLEAR VOC
VR-1120 from Cromax is a 2K clear based on an acrylic co-polymer. It can be applied over Basecoat for spot, panel and overall repairs. VR-1120 combines the trusted Cromax brand quality with excellent productivity at a competitive price.
Cromax® EL600 FLEET CLEAR
EL600 from Cromax is a 2K low-emission clear based on an acrylic co-polymer. EL600 Imron Fleet Clear is easy to apply and creates a robust clearcoat with excellent anti-graffiti properties. It gives a smooth, high-build finish with outstanding gloss retention and superior chemical resistance.