PercoTop CS307 – 2K High Chromate Wash Primer
PercoTop CS307 acid containing 2K adhesion promoter. It provides excellent adhesion and corrosion protection on metallic substrates, especially on aluminium and stainless steel. CS307 is a first stage primer and must be recoated with PercoTop® primer filler before topcoats are applied.
Colour – Ochre
Suitable substrates – Sanded and sandblasted steel and stainless steel sanded aluminium and galvanised steel
PercoTop CS308 – 2K Filling Wash Primer
PercoTop CS308 acid containing 2K adhesion promoter with, zinc chromate. It provides excellent adhesion and corrosion protection on metallic substrates, especially on aluminium and stainless steel. Re-coat with PercoTop Fillers and 2K PUR Topcoats.
Colour – Yellow
Suitable substrates – Steel, non ferrous metal, Galvanised steel, unpolished stainless steel
PercoTop CS309 – 2K Wash Primer
PercoTop CS309 an acid containing 2K adhesion promoter. It provides excellent adhesion and corrosion protection on metallic substrates, especially on aluminium and stainless steel.
Colour – translucent yellow
Suitable substrates – Aluminium and unpolished stainless steel. Mixed constructions of different materials, including steel, stainless steel, aluminium and galvanised steel
PercoTop CS310/CS312/CS313 – 1K QD Primer 010
PercoTop 1K Primer 010 is a fast drying, solvent borne zinc chromate-free 1K primer. It provides very good adhesion on metal substrates and is ideally suited for temporary and moderate corrosion protection levels. Recoatable with all PercoTop Topcoats with the exception of PercoTop EP Topcoat.
Colours – CS310: light grey CS312: white CS313: black CS315 can be used to mix other colours
Suitable substates – Steel, aluminium and other non-ferrous metals. Galvanic and zinc coated steel.
PercoTop CS340/CS342/CS343/CS345 – 2K HS Primer Filler 040
PercoTop 2K HS Primer 040 is a low VOC (<540g/l) 2K primer filler developed to address the most demanding requirements of the commercial vehicles, ACE segment and general industry. Ideally suited for large structures/equipment. Re-coatable with PercoTop® Topcoats
Colours – CS340: light grey CS342: white CS343: black CS345 can be used to mix other colours
Suitable substrates – Steel (sandblasting recommended), iron and zinc phosphated steel. Galvanised, sendzimir and hot dip galvanised steel Aluminium (pre-check recommended) Sanded EP and UP-GRP
PercoTop CS371/CS372 – 2K VHS Power Primer 4000
PercoTop 2K VHS Power Primer 4000 is a low VOC (< 420g/l) 2K primer filler with a very high solids content developed to address the most demanding requirements of the commercial vehicles, ACE segment and general industry. It is fast drying and can be used as primer or primer surfacer. Ideally suited for large structures/equipment. Recoatable with PercoTop Topcoats
Colours – CS371 pearl white, CS372 dark grey
Suitable substrates – Steel (sandblasting recommended), iron- and zinc phosphated steel. Galvanised, sendzimir and hot dip galvanised steel. Sanded EP and UP-GRP
PercoTop CS357/CS358/CS359 – 2K HS Wet-on-wet Filler
PercoTop 2K HS primer filler is a wet-on-wet filler especially suitable for commercial vehicles and high value plant refurbishment. It’s easy to apply and has a good overspray absorption making it ideal for large structures where sanding between coats is not practical. It can be overcoated with PercoTop® 2K topcoats and has a VOC < 540 g/l
Colours – CS357 Grey CS358 White CS359 Black
Suitable Substrates – Old sanded paintwork, UP-GF (cleaned and sanded) primed surfaces, cathodic dip coating (E-coat) coil and powder primer.
PercoTop CS381 – 2K Epoxy Primer
PercoTop 2K Epoxy Primer is a chemically resistant, zinc chromate-free solvent borne 2K primer filler It provides excellent adhesion and corrosion protection and is typically used in aggressive environments where protection is the main requirement. It can be overcoated with PercoTop 2K topcoats.
Colour – Light grey
Suitable substrates – Steel, iron and zinc phosphated steel, galvanised, sendzimir and hot dip galvanised steel. Aluminium (pre-check is recommended) sanded EP and UP-GRP
PercoTop CS382 – 2K Zinc Rich Epoxy Primer 053
PercoTop CS382 2K Zinc Rich Epoxy Primer 053 is a 2K Primer with a high amount of zinc content. It can be used as the first layer of a three layer paint systems for highest corrosion protection of heavy-gauge steel.
This zinc rich primer creates excellent barrier and cathodic protection and can be used with any suitable EP filler to produce a highly durable coating system. It’s also highly heat resistant up to a continuous temperature of 180ºC. Designed as a three stage system, It can be overcoated with PercoTop® Primers/Surfacers then PercoTop 2K Topcoats.
Colour – Grey
Suitable substrates – Sandblasted steel (SA 2.5).
DP5150 2-1 VOC Primer Surfacer
DP5150 is a 2K product based on special reactive binder system, with very high solids at application viscosity. This primer surfacer has excellent vertical stability, very good build and good sanding properties and is widely used in the automotive manufacturing sector as part of a recognised process for tier two automotive components and vehicle shells.
Colour – Light Grey / Dark Grey
Suitable substrates – Steel, galvanised, aluminium once cleaned, sanded and coated with corrosion protection primer. Composite materials free of release agents and well sanded old or original finishes.
PercoTop CS399 – Clear Carbon Fibre Sealer
PercoTop CS399 Clear Carbon Fibre Sealer is a polyurethane sealer designed to fill porosity in all grades of carbon fibre, resulting in fewer process steps and reduced material usage compared with standard clearcoat application.
CS399 has very good filling properties, excellent hardness when cured, is easy to apply, excellent flow and fast drying, resulting in faster processing times.
Colour – clear
Suitable substrates – Carbon fibre