left-image
right-image

Industrial SARIS Topcoats

SARQDPU – 1K Quick Drying Polyurethane Gloss

SARISQDPU 1K Quick Drying Polyurethane gloss topcoat, formulated to give the performance benefits of polyurethane alkyd resin technology.

A high solids, high gloss durable finish. Resistant to mild chemicals with good exterior durability. Designed for painting commercial vehicles, vehicle chassis, agricultural implements, plant and equipment refurbishment, where a quick drying cost effective high gloss coating is required.
A VOC compliant topcoat.

This product is available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Available in 5L and 20L Packs. Recommended primer SARPRIM1KCV – 1K CV Primer

SARGLOSS – 1K Quick Drying Gloss

SARISGLOSS Quick Drying Gloss topcoat with good all round durability, resistant to mild chemicals and good exterior durability. The ideal low cost solution for plant and equipment refurbishment and industrial fabrication work where a quick drying durable gloss coating is required. Also suitable for painting small components where short drying times are essential.

This product is available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Available in 1L to 20L Packs.Recommended primer – SARPRIM1KZP – 1K Zinc Phosphate High Build Primer

SARHAM- 1K QD Gloss Hammer Effect Topcoat

SARISHAM 1K Hammer effect topcoat is a quick drying, special effect metallic finish for application by brush or spray, often applied direct to metal, but for optimum durability, application over SARPRIM1KZP anti-corrosive primer is recommended. SARHAM hammer finish provides a good all round durable finish, resistant to mild chemicals with good exterior durability. The ideal coating for railings, gates and general metal fabrication work where a quick drying decorative metallic effective gloss coating is required.

This product is available in a limited range of colours – Black, Silver, Blue, Green, Red

Available in 5L Packs

SAR1KBRUSH – 1K Brushing Topcoat

SAR1KBRUSH 1K Brushing Topcoat is designed specifically for brush or roller application, a full gloss, giving good covering properties and ease of use. The ideal topcoat for coach painting, signs, narrowboats, plant and agricultural machinery, structural steelwork and general industrial fabrications. Based on long alkyd resin technology with mild non-aggressive solvent and low odour which makes it ideal for environments where spray application is unsuitable.

This product is available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Available in 1L to 20L Packs. Recommended primer – SARPRIM1KB – 1K Brushing Primer

SARVINS – 1K Vinyl Sheen Topcoat

SARVINS 1K Vinyl Sheen Topcoat provides outstanding adhesion to clean steel, galvanised surfaces and Plastisol coated steel, having excellent toughness, durability and chemical resistance. Good resistance against aqueous solutions of alkalis and acids, inorganic salts. This product has a long life to first maintenance when exposed to weathering in rural, town or coastal environments, provided that the coating has a sufficient dry film thickness for the particular application. It also adheres to glass, meeting the requirements of ASTM D3359 and ISO 2409.1 and is damp tolerant so can be applied on-site.

This product is available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Available in 5L and 20L Packs

SAR2KACRYL – 2K Acrylic Gloss CV Topcoat

SAR2KACRYL 2 Pack Acrylic Gloss CV Topcoat is a fast drying, high performance, durable, 2-Pack topcoat designed for painting commercial vehicles, trailers, chassis, agricultural implements and general machinery.
It has excellent resistance to most common chemicals including battery acid, alkalis, grease and oil. Due to its excellent exterior durability and chemical resistance, it is particularly suitable for applications where the longest coating life to first maintenance is required. The EU limit value for this product (product category IIB d) in ready for use form is max 420g/litre of VOC. The VOC content of this product in ready to use form is 410g/litre.

This product is available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Available in 1L to 20L Packs. Recommended primer SARPRIM1KCV – 1K CV Primer

SAREPOXY – 2K Epoxy Gloss

SAREPOXY 2 Pack Epoxy Gloss topcoat provides outstanding adhesion, toughness and durability and has a long life when exposed to aggressive environments. With excellent resistance to chemicals and polluted atmospheres (providing the coating is fully cured before exposure). SAREPOXY dries to a ultra-hard durable finish and is suitable for industrial applications where resistance to chemicals and harsh environments is the primary requirement.

This product is available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Available in 5L to 20L Packs. Recommended primer – SARZINCEPOXY – 2K ZP Epoxy Primer

SAR2KDTMGLOSS – 2K Direct to Metal Gloss

SAR2KDTMGLOSS is a fast drying, high performance, durable, 2-Pack topcoat designed for application direct to metal without the need for primer*.

Ideal for painting plant and equipment, agricultural implements and general machinery. It has excellent resistance to most common chemicals including battery acid, alkalis, grease and oil. Due to its excellent exterior durability and chemical resistance, it is particularly suitable for applications where the longest coating life to first maintenance is required.

Conforms to Department of Environment PG6/23 Clause 20 (d) (v), to help customers achieve target emissions of 0.60 under the Solvent Emissions Directive.

The VOC content of this product in ready to use form is 410g/litre.

This product is available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Available in 5L or 20L Packs.

*please see TDS for suitable substrates

SAR2KDTM – 2K Direct to Metal 

SAR2KDTM is a fast drying, high performance, durable, 2-Pack topcoat designed for application direct to metal without the need for primer*.

Ideal for painting plant and equipment, agricultural implements and general machinery. Typical gloss levels achievable are 70-80% depending on application method, film build and colour. 

SAR2KDTM has excellent resistance to most common chemicals including battery acid, alkalis, grease and oil. Due to its excellent exterior durability and chemical resistance, it is particularly suitable for applications where the longest coating life to first maintenance is required.

Conforms to Department of Environment PG6/23 Clause 20 (d) (v), to help customers achieve target emissions of 0.60 under the Solvent Emissions Directive.

The VOC content of this product in ready to use form is 410g/litre.

This product is available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Available in 5L or 20L Packs.

*please see TDS for suitable substrates

SARDTM – 1K Direct to Metal Sheen Topcoat

SARDTM 1K Direct to Metal topcoat, sheen finish for application direct to steel without the need for a primer. Suitable to apply by conventional spraygun with 2.0mil + tip. Quick drying with good all round durabity, resistant to mild chemicals, good exterior durability, corrosion resistance and excellent re-coating properties. Ideal low cost coating for plant equipment and industrial fabrication work where a quick drying cost effective sheen finish is required.

This product is available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Available in 5L to 20L Packs

SARONECOATC – 1K DTM Sheen Topcoat (AIRLESS)

SARONCOATC 1K DTM sheen finish, anti-corrosive coating designed for application direct to steel without the need for a primer. Specifically formulated to apply by Airless/Air Assist. Quick drying with good all round durability, resistant to mild chemicals, good exterior durability, corrosion resistance and excellent re-coating properties. Ideal low cost coating for plant equipment, skips and industrial fabrication work where a quick drying cost effective coating is required. Compliant with VOC below 420g(L) Conforms to Department for the Environment PG6/23 Clause 20(D)(V).

This product is available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Available in 5L and 20L Packs